WIM COMPAS™

Fuel and flare gas combustion measuring
The WIM COMPASTM process analyzer for measuring the Wobbe Index, heating Value (BTU) and the Combustion Air Requirement Index (CARI).

Flare gas analysis
The WIM COMPASTM meets the new RSR regulation standards, it handles the measurement of high dew points or concentrations of corrosive elements, like H2S, with a response time of 30 seconds. Read More…

Natural gas and LNG blending control
Offering an unmatched combination of speed of response, accuracy, repeatability and availability, the WIM COMPASTM is the preferred instrument to optimize gas-blending stations. Read More…

Blast Furnace and cokes gas blending
Blast Furnace Gas (BFG) is produced in every steel plant, whereas Coke Oven Gas (COG) is available on site as well as it is being formed during the production of cokes. Read More…

More WIM COMPAS ™

TISOMIC

H2S, H2O and CO2 analyzer with PA-TDL technology
The Hobré TISOMIC can simultaneously measure H2S, CO2 and H2O in gases. A low ppm range is achievable with a 10 cm path length resonator, without the use of multipass mirrors.

H2S and CO2 in amine absorbers
The H2S and CO2 removal from acid gasses is a widely used technology in gas and oil productions, refining, and petrochemical processes. Read More…

H2S in multi-phase crude oil
Hobré Instruments has designed a complete sample solution, based on stripping the H2S from the liquid phase by use of a stripper column which allows H2S measurement in gaseous phase. Read More…

H2S / H2O / CO2 in (natural) gas treatment
The TISOMIC is a proven and virtually maintenance free on-line process analyzer for sales gas applications. Read More…

More TISOMIC

C-QUAND

On-line XRF analysis of elements in liquid process streams

Our latest XRF analyzer for on-line elemental analysis in liquids, from silicon (Z=14) to uranium (Z=92), from ppm to percentage levels. Capable of multiple elements identification and quantification by one single analyzer.

Pipeline monitoring (Total Sulphur measurement)
XRF is widely used for total sulfur analysis in petroleum products. Read More…

Catalyst monitoring for PTA and PIA plants
Continuous measurement of the Co-Mn acetate and tetrabromo-ethane catalyst in PTA production enables better control of the process thus enhancing yields, improving product quality and increasing throughput. Read More…

Fe, Co, Ni, Cu, S, Cl, As, Mo & PGM in metal refining
XRF analysis is the method of choice to monitor complex metal mixtures in solution as XRF measures at atomic level, so independent of the oxidation state or metal complex. Read More…

More C-Quand

HICOSYS

H2O and CO Measurement in the Food and Pharmaceutical industries
The safety and efficiency of spray drying has become increasingly important for manufacturers operating in the food and pharmaceutical industries due to increasing demand, energy prices, and environmental requirements.
Our carbon monoxide detector and moisture measurement instrument is the first to combine safety and efficiency and will provide control over the two key operational goals in the drying process.

CO detection in dairy products
Our CO detection system controls the process conditions of milk powder drying industries, to prevent powder from smoldering… Read More… 

H2O moisture measurement in dairy products
The moisture content of the dairy product affects the quality of the powder, which can lead to unwanted Maillard reactions during the drying process. Read More… 

CO detection in the pharmaceutical industry
CO detection is of high priority as there are tight requirements for quality control during the processing of medicines and other pharmaceutical products… Read More… 

More HICOSYS

NICOSYS

CO detection in the Food and pharmaceutical industries

The safety of powder drying has become increasingly important for manufacturers operating in the food and pharmaceutical industries. The outbreak of fire is a significant risk in these factories, potentially causing serious damage.

More NICOSYS
NICOSYS CO detection in spray drying

HIFISC

Gas Sample Conditioning System

The HIFISC Gas Sample Conditioning System takes a radically different approach, resulting in quick response time, high analyzer uptime, reduced maintenance and improved performance. It can be combined with most process gas analyzers.

More HIFISC

HIGAS

Natural Gas Quality Analyzer Meter

The HIGAS is a compact natural gas quality analyzer meter, providing the Wobbe Index, Heating Value, Specific Gravity and Combustion Air Requirement within 15 seconds.

More HIGAS

INTEGRATED PRODUCT SOLUTIONS

Complete analyzer packages.

All our analyzers can be supplied with all associated systems, from sample probes to final data reporting systems. Our expertise with complete analyzer solutions and manual sampling covers:

Typical Application

  • Measurement of trace H2S and S in gases and liquids
  • Measurement of H2S and SO2 by UV spectroscopy in SRU plants
  • Physical property analysis
  • Oil in water analysis
Integrated Product Solutions

DISTRIBUTED PRODUCTS

Distributed analyzer solutions.

To fulfill our customers’ need, we act worldwide as a distributor for process analyzers. Hobré can supply customers with all support required to implement and operate these analyzers.

Typical Application

Measurement of trace H2S and S in gases and liquids

Measurement of H2S and SO2 by UV spectroscopy in SRU plants

Physical property analysis

Oil in water analysis

Distributed Products